Siemens Climatix Series Basis Document page 96

Parameter
Reliability
Active prio
Special settings
Special infos
Priority array
Access level
Parameter
Parameter
Msg class fault
High limit
Low limit
96 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 96
BDCX.100820.01GB
Building Technologies
Range
– OK.
– Other
– Process Error
– Config err
– Out of serv.
– Prio1
– ....
– Prio16
– Default
---
---
---
6.2.2 Special settings
• Read: Levels 4 and 2.
• Write: Levels 4 and 2.
Range
– Danger (A)
– High (A)
– Low (B)
– Warning (C)
– No alarm
0...100 [%]
0...100 [%]
Standard application AHU
Detail pages: Inputs and outputs
Function
Reliability state for hardware.
– Basis controller: Calibration lacking (output defec-
tive). Extension module POL955: Calibration lack-
ing (Output defect) or communication to base con-
troller unavailable or the output is incorrectly con-
figured.
– Basis controller: Process error in program.
– Extension module: Message no available.
– Basis Controller: Output configured incorrectly.
Extension module: Message no available.
Displays the wired Prio elements currently on the
output.
Go to Special settings page (at access levels 4 and
2 only).
Go to Special info page (at access levels 6, 4 and 2
only).
Go to Priority array page (at access levels 6, 4 and
2 only).
Function
Set alarm class (and groups A, B, C):
– Set the Unit in Stop Mode.
– Set the Unit in Off Mode.
– Only Message.
– Only Message.
– No Message, no Alarm.
Upper limit of output signal.
Lower limit of output signal.
CE1P3977en_02
01.02.2010