Motor Operating Hours Monitoring; Motor Stop Time Monitoring - Siemens SIMOCODE 3UF Programming And Operating Manual

9.7.2

Motor Operating Hours Monitoring

Motor Operating Hours Monitoring
The Motor Operating Hours monitoring function enables the operating hours (service life) of
a motor to be recorded so that motor maintenance prompts can be generated in good time
as applicable.
Level (CiR)
If the operating hours exceed the set Response Level, the Monitoring function will be
activated.
Level
Response
You can set the response for overshoot here:
Response
Disabled
Signaling
Warning
Tripping
9.7.3

Motor Stop Time Monitoring

Motor Stop Time Monitoring
System parts for important processes often have dual drives (A and B drives). Ensure that
these are always operated alternately. This prevents long Motor Stop Times and reduces the
risk of non-availability. The motor stop time monitoring function can be used, for example, to
generate an alarm, thus initiating connection of the motor.
Level (CiR)
The length of the permissible motor stop time is stipulated here, if exceeded, monitoring will
begin.
Level
Activity
Unless deactivated, this function is always active, independent of whether the motor is
running or not (operating state "on").
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
0 to 1193046 hours
0 to 65535 hours
9.7 Operating Hours Monitoring
Level
X
X
X
-
Monitoring Functions
63