Siemens Climatix Series Basis Document page 147

Parameter
Parameter
Actual objects
Act object moemory
Act int memory
COV act clients
ALH act clients
Valid objects
Version
Data check sum
Max objects
Max object memory
Max int memory
COV max clients
ALH max clients
Siemens
Building Technologies
Diagnoses ram, objects and COV or alarm handler clients.
Parameters can be read with level 4. They are always write-protected.
Main Index > System overview > All system settings > Diag object handler
Range
... [B]
... [B]
– Yes
– No
... [B]
... [B]
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
System settings
Function
Number of actual objects for the enabled configuration.
Actual required memory.
Maximum amount of available dynamic memory.
Number of subscribed internal and external COV clients.
Number of subscribed internal and external alarm handler
clients.
Displays whether valid data is present in the object han-
dler. For faults, evaluate the measuring and control task of
the diagnostic object.
Object handler version.
Internal checksum of the enabled configuration.
Maximum number of enabled objects.
Maximum memory for objects.
Maximum memory for data.
Maximum number of internal and external COV clients.
Maximum number of internal and external alarm handler
clients.
147 / 244
CE1P3977en_02
Page 147
01.02.2010