Siemens Climatix Series Basis Document page 200

Main Index > Unit > Temp control > Min/max ctrlr sply
Parameter Function
Min controller Actual Value Minimum Controller; Jumpline
to settings
Max controller Actual Value Maximum Controller; Jumpline
to settings
Min setpoint Setpoint for the min Controller
Max setpoint Setpoint for the max Controller
Main Index > Unit > Temp control > Hrec damper
Parameter Function
Controller Heat Recovery Damper Controller; Jumpline
to settings
Output signal Heat Recovery Damper Position; Jumpline
to settings
Recovery value Heat Recovery Value
Min fresh air Min Open of Heat Recovery Damper
Start up time Start up Time for Heat Recovery Damper
Start up tmp Start Up Temperature for Heat Recovery
Damper
Main Index > Unit > Temp control > Heat recovery
Parameter Function
Controller Heat Recovery Controller
Output signal Heat Recovery Position
Command Heat Recovery status
Pump / cmd Pump Status; Jumpline for settings
Aalarm Heat Recovery alarm
Frost monitor Heat Recovery Frost monitor
Frost protection Jumpline for Frost protection settings
Frost protect press Jumpline for settings
Efficiency Heat Recovery Efficiency
Start up time For this Time the Hrec run with 100% at
Startup
Start up tmp If the Outside temperature is lower or equal
this Value the Hrec do run for Start up time
Max speed defrost Maximum allowed speed in case of Frost
(monitor = Frost)
Main Index > Unit > Temp control > Heat recovery > Pump / cmd
Parameter Function
Command Heat Recovery status
Fdbk Heat Recovery Pump Feedback
Alarm Heat Recovery Pump alarm
Start up delay fdbk After this Time the Feedback has to be
TRUE
Off by fdbk alarm In case of a Feedback alarm the Pump is
switched Off
Min run time Mnimum On Time after a Start
Kick date / time Pump Kick Date and Time
Kick interval Intervall Time for Pump Kick
Kick on time Pulse length for Pump Kick
200 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 200
BDCX.100820.01GB
Building Technologies
17.15.7 Min/max ctrlr sply
17.15.8 Hrec damper
17.15.9 Heat recovery
17.15.10 Heat recovery > Hrec (pump) cmd
Standard application AHU
HMI
Value range Unit
0...100 %
0...100 %
15...26 °C
17...50 °C
Value range Unit
0...100 %
0...100 %
0...100 %
0...100 %
0...600 --- S ---
-64...64 °C
Value range Unit
0...100 %
0...100 %
On...Off
On...Off
OK...alarm
OK...Frost
0...100 %
0...100 %
0...600 --- S ---
-64...64 °C
0...100 %
Value range Unit
On...Off
Nofdbk...fdbk
Ok...alarm
0...36000
No...Yes
0...36000
0.0...36000.0 h
0...36000 --- S ---
Standard R S Link
X
X Section:
5.5.5
17.0 6
27.0 6
Standard R S Link
X
X
Section:
0.0 6
5.6
20 6
60 6
15.0 6
Standard R S Link
X
X
X
X
X Section:
6
5.7.1
X
X
60 6
15.0 6
20 6
Standard R S Link
X
X
X Section:
6
5.7.2
Yes 6
180 6
6 Section:
168.0 6
5.7.3
60 6
CE1P3977en_02
01.02.2010