Examples; Hmi; Overview; Start Page - Siemens Climatix Series Basis Document

Start page

Parameter Function
Password enter Jumpline to enter the Password
Jumpline to main index Page for the hole

Main index

Unit
Jumpline to the short overview Page for the
Main overview
Unit
Actual Status from Manual operation (if the
Manual operation configuration is done you see only one of
this two lines)
Actual Status from Manual operation (if the
Manual operation
configuration is done you see only one of
this two lines)
Act operating Mode Actual operating Mode from the Unit
Actual value from the Outside air
Outside air temp
Temperature
Actual value from the Supply air
Supply air temp
Temperature
Actual value from the for controlling used
Act room tmp
Room Temperature
Actual value from the Exhaust air
Exhaust air temp
Temperature
Main Index
Parameter Function
Unit Main entry into the HMI for all Values
Global functions Jumpline to global functions
Alarm handling Jumpline to alrm handling
Jumpline to Integrations Energy meter and
Integrations
Room units
System overview Jumpline to system overview
Overview IO Jumpline to Overview for all IO settings and
confi/rawvalues raw Values
Indicator if configuration is finished.
Configuration
Jumpline to configuration pages
Siemens
Building Technologies
16

Examples

A sample configuration is planned for the next documentation version.
17

HMI

17.1

Overview

The following applies to all tables:
15. Column R: Required read access level
Empty means that it can always be read.
16. Column W: Required write access level or to go to next level
Empty means go to or write is always permitted
X stands for readable value only (e.g. actual value).
17.2 Start page
17.3 Main index
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
Examples
Value range Unit
-64.0...64.0 °C
-64.0...64.0 °C
-64.0...64.0 °C
-64.0...64.0 °C
Value range Unit
Not done
done
Standard R S Link
Standard R S Link
4
4
177 / 244
CE1P3977en_02
01.02.2010
Page 177