Siemens Climatix Series Basis Document page 92

Parameter
Op mode output
Op mode outp select
Parameter
Parameter
Output
Manual operation
Schedule
Calendar exception
From BACS
92 / 244
Basis Document Siemens Climatix Control System
Siemens
Page 92
BDCX.100820.01GB
Building Technologies
Range
– Off
– On
– Off
– On/Comfort
– Economy
– Manual
– Osstp
– Night clg
– Unocc
– Night kick
– Fire dmper
– Fire
– Stop
– Running
– Htg full
– Hrec full
– Clg full
5.13.2 TSP output
Main Index > Unit > Auxiliary > TSP output
Range
– Off
– On
– Off
– On
– NULL
– Off
– On
– Passive
– Active
– Auto
–
– Off
– On
Standard application AHU
Functions
Function
Displays whether the desired (using Op mode outp
select) operating mode for the plant is enabled. Go
to page with digital output settings.
Selection of operating modes to be displayed on
output op mode output:
– Plant off.
– Plant on or in Comfort mode.
– Plant in Economy mode.
– Manual intervention enabled.
– Boost enabled.
– Night cooling, active.
– Not used, active (Temp. difference start).
– Plant kick enabled.
– Fire damper test enabled.
– Fire alarm enabled; plant in fire alarm mode.
– Plant stopped and locked.
– Plant is operating (On/Co/Ec/Osstp/
NightClg/Unocc/Nightkick/Startup).
– Hot water or electrical register on
100 %.
– Heat recovery (plates, water, heat wheel) at
100%.
– Cooling at 100 %.
Function
Present state for output. Go to page with digital out-
put settings.
Manual adjustment of output (always has the high-
est priority).
– Off.
– On.
– Auto: The time switch catalog or the BACS con-
trols the output.
Present value for the time switch program. Go to
page with time switch program settings.
Present status of calendar for exception days. Go to
page with calendar settings.
– Calendar not in intervention.
– Calendar in intervention.
Control output via BACS:
– No intervention by BACS: The time switch cata-
log only acts on the output in this position.
– Off from BACS.
– On from BACS.
CE1P3977en_02
01.02.2010