Siemens Climatix Series Basis Document page 27

Sample displays
Date and time
Siemens
Building Technologies
Comfort mode, cooling
4.5.1 Startup behavior
The room unit initializes automatically after the room unit is connected to the con-
troller and the communication is operating (commissioning is completed). First, all
the symbols appear, then the symbol P__ appears on the display. The display
returns to normal after a short period. The displays state on P__ if communication
is not properly established (e.g. incorrect room unit address).
User presses the PROG button long (more than 1 second) to enter data and time.
The following applies:
• Flashing parameters can be changed using the
• Changes can (and must) be completed by pressing the
play automatically goes to the next adjustable parameter.
Please note: This is cyclical. The clock blinks again after changing and con-
firming the month and day. You can exit the menu at this point by pressing
the PROG button.
1. Press PROG button long (hour display blinks), then
set the hour with the
2. Taste Press OK (the hour is saved and the minute display flashes), then
set minutes with the
3. Press OK button (minutes are saved and the entire time display flashes),
then
set the time display format (12/24 hour display; use the
buttons)
4. Press OK (the display format is saved and the year display flashes), and
set the desired year with the
OK (the year is saved and the display shows the month/day display,
5. Press
the month display blinks), and
set the month with the
6. Press OK (the month and saved and the day display flashes), and
set the day with the
7. Press OK (month and day is saved; display returns to the time).
8. Press PROG (the display returns to normal).
The display returns automatically to normal when the PROG is not pressed
within one minute.
Basis Document Siemens Climatix Control System
Standard application AHU
BDCX.100820.01GB
Hardware overview
Economy mode, heating
plus and minus buttons.
plus and minus.
plus and minus buttons.
plus and minus buttons.
plus and minus buttons.
plus and minus buttons.
OK button. The dis-
plus or minus
CE1P3977en_02
01.02.2010
27 / 244
Page 27