Table of Contents
Advertisement
Software settings
Operating Instructions 610/630 - 00.0 - 05/2014
Fig. 57: Length correction continued
4. Proceed in this manner for all other segments.
5. After the last segment, press the END button.
Length correction is completed, the EDIT programming
mode opens.
7.8 Service mode SERVICE
In service mode, there are functions that can be used
for servicing work.
Service mode is password-protected, in order to avoid
unintentionally making incorrect machine settings.
More
precise
information
mode are provided in Service Instructions 610/630.
on
the
contents
of
service
105
Advertisement
Table of Contents
