Table of Contents
Advertisement
5.14.1 Initializing the control
Important
Initializing the control resets all values to the factory default settings.
All changes are lost.
Only execute this option if you really want to return to the factory settings.
Order
Save your seam programs and seam sequences to a USB key before
performing initialization.
1. Press the
The control is completely reset to the factory default settings.
5.14.2 Initializing the control panel
Important
Initializing the control panel resets all values to the factory default settings.
All changes are lost.
Only execute this option if you really want to return to the factory settings.
1. Press the
The control panel is completely reset to the factory default settings.
5.14.3 Performing an update of the control
Information
The latest software version is available in the download area at
www.duerkopp-adler.com.
You can easily transfer a new software version from a USB key to the
control.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler.
To perform an update of the control:
1. Switch off the machine.
2. Insert the USB key into the USB port (1) on the control panel.
84
Initialization Control
Operation panel initialization
option.
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
option.
Advertisement
Table of Contents
