7360 ISAM WM shelf cabling
Figure 242
22.6.1
The alarm cable is routed from the FWPC-A at the front of the 7360 ISAM WM,
through the right side of the rack, and connected to the alarm connector on the right
side of the 7360 ISAM FX-16 shelf; see Figure 243.
The male DB50 connector should be connected to the alarm connector of the
7360 ISAM FX-16, and the female DB50 connector should be connected to the rack
CO alarm cable.
416
7360 ISAM WM alarm cable
Alarm cable routing connection
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
25795
Issue: 09