Pmc Expansion Slots; Connecting To The Console Or Auxiliary Port With The Supplied Cable; Figure 2 Four-Port 10/100/1000 Ethernet Pmc Details - Nokia IP560 - Hard Disk Drive Based Installation Manual

1
Overview
Note
The Ethernet ports are intended for management or high-speed traffic.

Figure 2 Four-Port 10/100/1000 Ethernet PMC Details

Caution
Cables that connect to the Ethernet card must be compliant with IEEE 802.3ab, Cat 5E,
or Cat 5 cables to prevent potential data loss.

PMC Expansion Slots

The IP560 security platform provides two additional PMC expansion slots for NIC and ADP
module options.
For information about NICs, see
and Chapter 5, "About IP560 Appliance Network Interface Cards."
For information about ADP modules, see
Services Modules."
Nokia products only support NICS and ADP modules purchased from Nokia or Nokia-approved
resellers. The Nokia Global Support Services group can only provide support for Nokia products
that use Nokia-approved accessories. For sales or reseller information, contact a Nokia service
provider listed in the
Connecting to the Console or Auxiliary Port with the
Supplied Cable
The cable that Nokia provides with IP560 appliances includes a latching mechanism used to
secure the cable to the console port or auxiliary port of your appliance.
22
LInk LEDs (green)
Port 1
Chapter 4, "Installing and Replacing Network Interface Cards"
"Nokia Contact Information"
Port 3
Port 2
RJ-45 connectors
Chapter 6, "Installing, Using, and Replacing ADP
on page 3.
IP560 Security Platform Installation Guide
Port 4
00120a