Installing racks
4.2.3
You need the shipping container with rack and accompanying parts for this
procedure.
4.2.4
The following tools are recommended:
•
•
•
•
•
•
Procedure 6
1
2
3
4
5
62
Parts list
Recommended tools
adjustable wrench, 12 in. (30.5 cm)
carpenter's claw hammer
pinch bar, nail puller, or ripping chisel
safety glasses
shears common, metal
tin snips
The material-handling equipment necessary for safe
Danger —
handling includes a forklift truck, lifting sling or block and tackle,
and dolly. To prevent injury to personnel when operating the
material-handling equipment, use extreme care and follow
standard safety precautions.
Exercise care when moving the equipment.
Warning —
Excessive shock or vibration can cause damage to the
equipment.
To unpack equipment
Inspect each shipping container for damage.
If there is damage, notify the transportation carrier and Nokia immediately. Photograph all
damaged containers. Keep all inspection and packing documents for reference.
If there is no damage, place the container on a level floor as near to the final installation
location as possible. This area must be free of moisture, dirt, and dust.
Carefully open the top of the container. Take care not to damage the equipment.
Remove the exterior packing or bracing material.
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
Issue: 09