Auxiliary Port; Table 6 Pin Assignments Console Connector And Cable; Table 7 Pin Assignments For Aux Connector And Modem Cable - Nokia IP390 - Security Appliance Installation Manual

2
Installing the Nokia IP390 Appliance

Table 6 Pin Assignments Console Connector and Cable

Console Port
(DTE)
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
The console cable provided with the IP390 is comprised of two parts:
6-foot rollover cable with RJ-45 terminations
RJ-45 to DB-9 adapter
On the opposite end of the console cable, connect the RJ-45 to the DB-9 adapter, which you can
then connect to the host terminal.

Auxiliary Port

Use the built-in serial (AUX) port, shown in
managing the appliance remotely or out-of-band. The default configuration of the serial ports
are: 9600 baud, 8 bits, no parity, and 1 stop. bit.
modem connections.

Table 7 Pin Assignments for AUX Connector and Modem Cable

Auxiliary
Port (DTE)
Signal
RTS
DTR
TxD
GND
28
RJ-45 to RJ-45 Rollover
Cable
RJ-45 Pin RJ-45 Pin
1 8
2 7
3 6
4 5
5 4
6 3
7 2
8 1
RJ-45 to RJ-45 Rollover
Cable
RJ-45 Pin RJ-45 Pin
1 8
2 7
3 6
4 5
RJ-45 to DB-9
Terminal Adapter Remote Device
DB-9 Pin Signal
8 CTS
6 DSR
2 RxD
5 GND
5 GND
3 TxD
4 DTR
7 RTS
Figure 1, to establish a modem connection for
Table 7 provides pin assignment information for
RJ-45 to DB-25
Modem Adapter Modem
DB-25 Pin Signal
4 RTS
20 DTR
3 TxD
7 GND
IP390 Security Platform Installation Guide