Dummy Front Panels; Figure 52 Nt And Lt Slot Positions In 7360 Isam Fx-16 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

Installing cards in the 7360 ISAM FX-16 shelf
Figure 52
The 7360 ISAM FX-16 can be equipped with a maximum of 16 LT cards, 2 NT cards,
and 1 NTIO card.

7.3 Dummy front panels

Dummy front panels must be installed in any unused slot of a shelf to:
•
•
•
At slot deployment, the dummy front panel is replaced by the appropriate card and
the optical cables are connected to the card.
For more information on specific dummy front panels, see the 7360 ISAM FX Product
Information Guide.
126
NT and LT slot positions in 7360 ISAM FX-16
LT LT LT LT LT LT
1 2 3 4 5 6
Due to the length of the QSFP+ cable, it is
Note —
recommended that the vectoring vector processor card be
installed in slot #9.
ensure EMC compliance
ensure thermal compliance via a correct airflow in the shelf
ensure safety by avoiding direct contact with backplane connectors
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
LT LT NT NTIO NT LT LT LT
7 8 A B 9 10 11
CBs, LEDs and switches
Fan unit
Connectors
DRAFT
LT LT LT LT LT
12 13 14 15 16
22131
Issue: 09