Installing a 7360 ISAM FX-16 shelf
•
•
•
•
5.2.3
The following tools are recommended:
•
•
•
5.2.4
Before starting the procedure to mount the 7360 ISAM FX-16 shelf, a drip tray must
first be installed, see Procedure
shelf".
80
2 AWG .25 mm dual-hole lug
left and right mounting brackets including:
•
12 × 24 1/2 in. (12.7 mm) hex screws (x 5 each side)
heat and fiber management baffle kit including:
•
pre-assembled front and rear skirt, intumescent panel, and top baffle
•
M3 × 8 mm screws
•
M3 × 14 mm screws
•
required washers
•
fiber management bracket pre-assembly
•
12 × 24 1/2 in. (12.7 mm) screws
drip tray
Recommended tools
torque wrench
protective gloves
hex driver
Prerequisites
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
11 "To install a drip tray below a 7360 ISAM FX-16
DRAFT
Issue: 09