Figure 176 Mounting The 7360 Isam Fx-4 Pre-Assembled Shelf Mounting Bracket And Air Intake Baffle/Drip Tray In A 19 In. Rack - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual
Ansi
Hide thumbs
Also See for 7360 Intelligent Services Access Manager FX Series:
- User manual (142 pages) ,
- Service manual (26 pages) ,
- Service schematics (12 pages)
Table of Contents
Advertisement
ANSI Hardware Installation Manual
5
Figure 176
Mounting the 7360 ISAM FX-4 pre-assembled shelf mounting bracket and air intake
baffle/drip tray in a 19 in. rack
6
7
Issue: 09
Install the pre-assembled shelf horizontal mounting bracket and air intake baffle/drip tray
onto the bottom of the 19 in. rack as shown in Figure 176.
Caution — The pre-assembled shelf mounting bracket and air intake
baffle/drip tray is required in the bottom position of each installed
7360 ISAM FX-4 shelf in a rack.
Note — Torque the mounting bracket screws to 28 in. to 30 in. per lbs
after attaching the air intake/drip tray assembly to the rack.
Remove and discard the top mounting bracket and screws that were shipped with the shelf.
Remove the bottom mounting bracket, screws, and washers and retain them to re-install
later, see Figure
177
for the locations.
3HH-12893-AAAA-TCZZA
DRAFT
Installing a 7360 ISAM FX-4 shelf
(138.19)
(85.3)
23571
321
Hide quick links:
Advertisement
Table of Contents
