Figure 135 Fan Installation For 7360 Isam Fx-8 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual
Ansi
Hide thumbs
Also See for 7360 Intelligent Services Access Manager FX Series:
- User manual (142 pages) ,
- Service manual (26 pages) ,
- Service schematics (12 pages)
Table of Contents
Advertisement
ANSI Hardware Installation Manual
7
Figure 135
8
Issue: 09
In case of replacement, remove the installed fan unit:
i
Loosen the captive screw of the fan cover and remove the cover; see Figure 135.
Fan installation for 7360 ISAM FX-8
ii
Pull the fan unit out of the fan area by the handles.
iii
If a fan filter was installed, remove the fan filter.
Danger — When the fan unit is extracted, the fans will still be rotating.
Do not touch the fans, because this may cause bodily harm.
Caution — Be careful when removing the fan filter to ensure that dust
will not get into the card cage area and onto the card components to
prevent possible damage to the other equipment.
If the system is active, keep in mind the maximum time (5 minutes) fans are allowed to be
out of operation (see Danger warning about the risk of fire).
3HH-12893-AAAA-TCZZA
DRAFT
Installing a 7360 ISAM FX-8 shelf
22389
255
Hide quick links:
Advertisement
Table of Contents
