Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual page 293

ANSI Hardware Installation Manual
3
4
Procedure 62
Use this procedure to install network termination (NT) cards in a 7360 ISAM FX-8 shelf.
A 7360 ISAM FX-8 has one or two NT cards:
Figure
Issue: 09
Use the ejector handles to engage the board connectors in the backplane.
Lock the board in place with the fixation screws located at the top and bottom of the faceplate
of the board; see Figure 158. The maximum torque is 0.6 Nm.
Note — Once the board is mounted in its slot, the green PWR LED lights
up.
To install NT cards
Warning — For the 7360 ISAM FX-8, installation of NTIO cards must
be performed prior to installation of NT cards.
•
a single (first) NT card is inserted in slot NT-A
•
a redundant card, if any, in slot NT-B
159 shows the 7360 ISAM FX-8 NT cards in the slots.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-8 shelf
DRAFT
293