Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual page 375

ANSI Hardware Installation Manual
3
4
Procedure 83
Use this procedure to install network termination (NT) cards in a 7360 ISAM FX-4 shelf.
An 7360 ISAM FX-4 shelf has one or two NTcards.
Figure
Issue: 09
Use the ejector handles to engage the board connectors in the backplane.
Lock the board in place with the fixation screws located at the top and bottom of the faceplate
of the board; see Figure 216. The maximum torque is 0.6 Nm.
Note — Once the board is mounted in its slot, the green PWR LED lights
up.
To install NT cards
Warning — For the 7360 ISAM FX-4, installation of NTIO cards must
be performed prior to installation of NT cards.
•
a single (first) NT card is inserted in slot NT-A
•
the redundant card, if any, in slot NT-B
217 shows the 7360 ISAM FX-4 NT cards in the slots.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-4 shelf
DRAFT
375