Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual page 437

ANSI Hardware Installation Manual
5
6
7
8
Procedure 102
Issue: 09
If using a fiber management guide, route the fiber cables through the fiber management
guide, and toward the line cards. Otherwise, route the fiber cables, maintaining a proper bend
radius, toward the line cards:
a Route to the left for:
•
Line cards in slots 01 to 06
b Route to the right for:
•
Line cards in slots 07 to 12
Insert the fiber cables into the appropriate optical modules located on the front panels of the
line cards. If optical modules must first be installed, see Procedure 102.
Route and connect the other end of the fiber cables as per site practices.
STOP. This procedure is complete.
Installing an optical module
Caution — It is important to install optical modules prior to connecting
power to a 7360 ISAM WM shelf.
3HH-12893-AAAA-TCZZA
Fiber optic cable management in the
DRAFT
7360 ISAM WM shelf
437