Co Alarm Connector; External Interfaces On 7360 Isam Fx-12 - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
10
11
Procedure 36
Use the following procedure when the power cables need to be disconnected on 7360 ISAM FX-
12.
1
2
3
4
5

10.6 CO alarm connector

Figure
Figure 83

External interfaces on 7360 ISAM FX-12

Issue: 09
Verify that the fans spin.
STOP. This procedure is complete.
To disconnect the power cables
Warning — If the following sequence is not followed exactly, there can
be a possible fire hazard.
Before disconnecting the power cables, ensure that power to the cables has been
disconnected.
Switch off the circuit breakers for BAT A and BAT B
Disconnect the battery cables BAT A and BAT B
Disconnect the BATRET cables RET A and RET B
STOP. This procedure is complete.
83 shows the external interfaces on the 7360 ISAM FX-12 shelf.
External
Alarms
3HH-12893-AAAA-TCZZA
BITS connection
DRAFT
7360 ISAM FX-12 shelf cabling
Remote
Craft
24864
179