ANSI Hardware Installation Manual
9
Figure 31
Issue: 09
Once the heat and fiber baffle kit is mounted and secured to the top of the shelf, attach the
fiber management bracket to the cable management bracket of the 7360 ISAM FX-16 shelf
using two washers and one screw in an upward-facing position for each of the six mounting
holes. See Figure
31
for an overall view of the fiber management bracket, and Figure
the installation of the fiber management bracket.
Note — Once the fiber management bracket has been attached to the
cable management bracket, the fiber management guide can be
installed. See Chapter
7360 ISAM FX-16
Fiber management bracket
3HH-12893-AAAA-TCZZA
Installing a 7360 ISAM FX-16 shelf
8 "Fiber optic cable management in the
shelf".
DRAFT
32
for
25361
93