Table of Contents
Advertisement
Use IEEE 802.3 10BASE-T, 100BASE-TX unshielded twisted-pair, full-
duplex or half-duplex cable.
Caution
Cables that connect to the Ethernet card must be IEEE 802.3
compliant to prevent potential data loss.
You can order appropriate adapter cables separately. You can order additional
cables from a cable vendor of your choice.
Figure 12
connector is numbered from right to left, with the copper tabs facing up and
toward you.
Figure 12 Output Connector for the Ethernet Cable
Figure 13
Nokia 60s and 100s Installation Guide
shows the pin assignments for the cable. The RJ-45 cable output
8
1
00113b
shows the pin assignments for the RJ-45 cross-over cable.
Dual-Port 10/100 Ethernet Interface, PMC
Pin#
Assignment
1
TX
2
TX
3
RX
4
5
6
RX
7
8
49
Advertisement
Table of Contents
Troubleshooting
