Cards With Optical Fiber Connectors; Location Of Earth Bonding Point - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
Figure 99
11.6.2.2
Observe the following.
Figure
Issue: 09

Location of earth bonding point

A: 60A B: 60A
External Alarms
BITS
NTA
GND
NTB
7360 ISAM FX-12
Remote
Craft
BAT A
BAT B
Alarms
Min. Maj. Crit.
ACO
GFC LT1 LT2 LT3
Alarm

Cards with optical fiber connectors

Risk of eye damage or skin burns by laser emission.
Danger —
When installing optical cards or handling optical fibers, never
look inside connectors of cards or fibers when these are not
connected.
Put end caps on open connectors to protect against
unexpected emission.
Risk of damage by ESD when card is not
Caution —
connected.
This card contains devices that are susceptible to damage
caused by ESD in unconnected circuit conditions.
Carefully follow ESD safety precautions.
100 shows a laser classification label.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-12 shelf
LT4 LT5 LT6 NTA NTIO NTB LT7 LT8 LT9
ENERGY HAZARD
ROATING FAN BLADES
KEEP FINGERS AWAY FROM
TOP AND BOTTOM OF FAN TRAY
DRAFT
ESD
LT10 LT11 LT12
24899
201