Figure 222 Remove Safety Cover And Power Cable Screws On 7360 Isam Fx-4; Figure 223 Remove Fixation Screws For Ngfc-G Card - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual
Ansi
Hide thumbs
Also See for 7360 Intelligent Services Access Manager FX Series:
- User manual (142 pages) ,
- Service manual (26 pages) ,
- Service schematics (12 pages)
Table of Contents
Advertisement
ANSI Hardware Installation Manual
Figure 222
3
Figure 223
4
5
6
7
Issue: 09
Remove safety cover and power cable screws on 7360 ISAM FX-
4
Remove the fixation screws located on the front panel of the card; see Figure 223.
Remove fixation screws for NGFC-G card
Remove the NGFC-G card from the shelf and wear the antistatic wrist strap. Place the card
in an ESD protective bag.
Remove the new NGFC-G card from its ESD protective bag. Wear the antistatic wrist strap.
Slide the new NGFC-G card in its slot.
Secure the NGFC-G card in place with the fixation screws. Maximum torque: 1 N.m ±10%.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-4 shelf
DRAFT
22398
22400
381
Hide quick links:
Advertisement
Table of Contents
