Figure 214 Label For Earth Bonding Point; Cards With Optical Fiber Connectors - Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual

ANSI Hardware Installation Manual
Figure 214
19.6.2.2
Observe the following.
Figure
Issue: 09
Label for earth bonding point

Cards with optical fiber connectors

Risk of eye damage or skin burns by laser emission.
Danger —
When installing optical cards or handling optical fibers, never
look inside connectors of cards or fibers when these are not
connected.
Put end caps on open connectors to protect against
unexpected emission.
Risk of damage by ESD when card is not
Caution —
connected.
This card contains devices that are susceptible to damage
caused by ESD in unconnected circuit conditions.
Carefully follow ESD safety precautions.
215 shows a laser classification label.
3HH-12893-AAAA-TCZZA
Installing cards in the 7360 ISAM FX-4 shelf
DRAFT
22391
373