ANSI Hardware Installation Manual
6
Figure 19
7
Issue: 09
Mount the seismic rack extender on the rack using the screws provided, then mount the
connector plate at the top of the extender; see Figure 19.
Note — The connector adapter kit provides rack tie-down facilities per
Telecordia specifications.
Rack connector plate for 7-ft rack
Flathead screw
Connector plate
Rack top
Brace the rack per recommended office practice. Figure
the rack to overhead rails.
3HH-12893-AAAA-TCZZA
Adapter plate assembly kit
Hexhead screw
Lockwasher
Hardware used for mounting
braces from connector plate
to overhead rails/cable tray
DRAFT
Installing racks
22368
20
provides an example of attaching
73