Nokia 7360 Intelligent Services Access Manager FX Series Hardware Installation Manual page 400

Installing a 7360 ISAM WM shelf
Procedure 91
Proceed as follows to install a 7360 ISAM WM shelf:
1
2
3
4
400
Installing a 7360 ISAM WM shelf in a 23 in. rack
Unpack and visually inspect the shelf and mounting kit for physical damage.
If anything is missing or damaged, notify the transportation carrier and Nokia immediately.
Photograph any damaged equipment. Keep all the inspection and packing documents as a
reference.
Warning — Possibility of equipment damage.
Do not install damaged equipment, as it can adversely affect other
equipment.
Put on the antistatic wrist strap and connect it to a grounding point.
Verify the 7360 ISAM WM shelf mounting positions, as shown in Figure 232.
Note — Figure 232
a rack, and in conjunction with a 7360 ISAM FX-16 shelf. The
7360 ISAM WM can also be installed in a rack with a 7360 ISAM FX-8 or
7360 ISAM FX-4 shelf, with similar installation and distance between
shelves. Contact your Nokia representative for more information.
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
shows the 7360 ISAM WM installed at the bottom of
DRAFT
Issue: 09