Status Ids Of The Data Points - Siemens Simatic RTU303xC Series Operating Instructions Manual

Signal type Data type (bit)
Analog input Floating-point
(analog memory number with
bit) sign (32)
Analog output Floating-point
(analog memory number with
bit) sign (32)
* DNP3: The variations in bold print are the standard variations preferably used by the RTU.
4.23.7

Status IDs of the data points

Status IDs of data points
With the values of the data points, the RTU sends 1 byte with status IDs. The status IDs can
be evaluated by the partner.
The following tables contain the status IDs of the communication protocols.
The "meaning" (second row of the table) relates to the specified "bit status" (third row of the
table).
Status IDs - TeleControl Basic
Table 4- 8 Byte assignment of the status byte for data points
Bit 7
Flag name -
Meaning -
not sup-
Bit status
ported
(always 0)
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
TeleControl
Basic
Analog input
32 Bit Float
Analog output
32 Bit Float
6 5
NON_ SB
Substituted
EXISTENT
Data point Substitute
does not value
exist
always 0
1
Supported data point types
ST7
(Data points per
object)
Ana04W_S (4 x 16
Bit)
Mean04W_S (4 x 16
Bit)
Set01W_S (1 x 16
Bit)
Ana04R_S (4 x 32
Bit)
Ana04W_R (4 x 16
Bit)
Set01W_R (1 x 16
Bit)
Ana04R_R (4 x 32
Bit)
4 3
LOCAL_ CY
FORCED CARRY
Local oper- Counted
ator control value over-
flow before
reading the
value
not sup- not sup-
ported ported
(always 0) (always 0)
Configuration (WBM)
4.23 Telecontrol
DNP3
Object group [varia- <type identifica-
tion] *
Analog Output Status
40 [1, 2, 3]
Analog Output 41 [1,
2, 3]
Analog Output Event
42 [1, 2, 3, 4, 5, 7]
2 1
OVER_ RESTART
RANGE
Analog Value not
value: Val- updated
ue range after start
exceeded
1 1
IEC
tion>
M_ME_TF_1
<36>
C_SE_NC_1
<50>
0
ONLINE
Value is
invalid
1
239