Siemens Simatic RTU303xC Series Operating Instructions Manual page 328

Diagnostics and maintenance
6.2 Error detections for Telecontrol, e-mails and FTP
Code
535
550
551
552
553
554
5xx
Table 6- 2
Code
400 - 499: Non execution of the command (temporary error)
421
425
426
450
451
452
500 - 599: Non execution of the command Check necessary
500
501
502
503
504
530
532
550
551
552
553
328
Meaning
SMTP authentication incomplete
Check "Services" > "E-mail" in the configuration:
"User name" and "Password"
•
"Connection security"
•
Syntax error - recipient e-mail address or domain unknown.
Check "Users / groups" > "Groups" in the configuration:
E-mail address of the recipient
•
Mailbox not local
Try forwarding
Action aborted - error in memory assignment
The e-mail could not be transferred because the size of the e-mail exceeds the maximum
set by the administrator.
Action not executed - mailbox name not allowed (syntax incorrect)
See error 535.
Transfer failed - no SMTP service available.
Other error message from the e-mail server
The status corresponds to the three-digit error number of the SMTP protocol.
FTP
Meaning
Service not available, control connection will be terminated.
Data connection cannot be established.
Connection terminated. Transfer aborted.
Requested file procedure was not executed. File not available.
Requested procedure aborted. Local error during processing.
Requested procedure not executed; not enough memory space on the system.
Syntax error - command not recognized.
Syntax error in the parameters
Command not implemented
Invalid command sequence
Command not implemented for this parameter
Not logged on
Logon is necessary to save files.
Requested file procedure was not executed. File not available.
Requested procedure aborted. Unknown page type.
Requested file procedure aborted: Not enough space in the current directory or data rec-
ord.
Requested procedure not executed: Illegal file name.
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC