Siemens Simatic RTU303xC Series Operating Instructions Manual page 336

Technical data
Technical specifications - RTU3030C/3031C
Power supply from the battery
module *
Current consumption (without
connected loads with minimum
configuration)
Active power loss (without con-
nected loads with minimum con-
figuration)
Control output (X10)
Control and supply of external
devices
Maximum Power
336
Design
Possible cable cross-section
Minimum
•
Maximum
•
Max- tightening torque of the
screw terminals
Battery modules are not supplied with the device. See Accessories, section Battery
module (Page 351).
In "sleep mode"
In "update mode"
Also with extension board in
•
Modbus mode and with ac-
tive fail-safe resistance
Also with "GPS always ac-
•
tive" (RTU3031C)
In "communication mode"
In "sleep mode"
In "update mode"
Also with extension board in
•
Modbus mode and with ac-
tive fail-safe resistance
Also with "GPS always ac-
•
tive" (RTU3031C)
In "communication mode"
Regulated, short-circuit proof, can be configured alternatively, for all outputs:
12 V DC
•
24 V DC
•
See below (power)
Connector with terminal block, 5 terminals, protected
against reverse polarity:
1 input X10 IN (L+, M)
•
1 output X10 CTRL (L+, M)
•
0.2 mm (28 AWG)
• 2
(16 AWG)
1.5 mm
• 2
0.56 .. 0.79 Nm (5 .. 7 in lbs)
With battery operation (7.2 V DC): 0,28 mA (typ.)
•
With ext. supply (24 V DC): 14 mA (typ.)
•
With battery operation (7.2 V DC): 71 mA (typ.)
•
With ext. supply (24 V DC): 35 mA (typ.)
•
With battery operation (7.2 V DC): 5 mA (typ.)
•
With ext. supply (24 V DC): 3 mA (typ.)
•
With battery operation (7.2 V DC): 46 mA (typ.)
•
With ext. supply (24 V DC): 12 mA (typ.)
•
With battery operation (7.2 V DC): 208 mA (typ.)
•
With ext. supply (24 V DC): 83 mA (typ.)
•
With battery operation (7.2 V DC): 2 mW (typ.)
•
With ext. supply (24 V DC): 340 mW (typ.)
•
With battery operation (7.2 V DC): 510 mW (typ.)
•
With ext. supply (24 V DC): 850 mW (typ.)
•
With battery operation (7.2 V DC): 36 mW (typ.)
•
With ext. supply (24 V DC): 72 mW (typ.)
•
With battery operation (7.2 V DC): 331 mW (typ.)
•
With ext. supply (24 V DC): 288 mW (typ.)
•
With battery operation (7.2 V DC): 1500 mW
•
(typ.)
With ext. supply (24 V DC): 2000 mW (typ.)
•
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC