Tags - Siemens Simatic RTU303xC Series Operating Instructions Manual

Configuration (WBM)
4.20 Extension board
● Data bits
– 8 (cannot be changed)
● Stop bits
– 1
– 2
Modbus RTU
● Slave address (UID)
Enter the Modbus address of the device.
Range of values: 1 ... 247
Parameters for device type HART
HART
● Polling address
Enter the polling address of the device.
Range of values: 0 ... 63
4.20.5

Tags

Note the characters permitted for the input boxes, see section Permitted characters and
parameter lengths (Page 95).
You can configure up to 16 tags. The variable type (Modbus or HART) is automatically
determined by the selection of the device and displayed accordingly.
Parameters for device type "Modbus"
● Active
● Name
206
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC