Siemens Simatic RTU303xC Series Operating Instructions Manual page 383

Session lock
Message text
Example
Explanation
Severity
Facility
Standard
Closing a remote access session
Message text
Example
Explanation
Severity
Facility
Standard
Access via untrusted networks
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
{Protocol}: The session of user {User name} was closed after {Time second} seconds of inactivity.
WBM: The session of user admin was closed after 60 seconds of inactivity.
The current session was ended due to inactivity.
Warning
local0
IEC 62443-3-3 Reference: SR 2.5
{Protocol}: Remote session {Config detail} was closed after {Time second} seconds of inactivity.
WBM: Remote session OpenVPN was closed after 120 seconds of inactivity.
The VPN connection was terminated after a period of inactivity.
Notice
local0
IEC 62443-3-3 Reference: SR 2.6
{Protocol}: Remote access enabled via {Trigger condition}.
WBM: Remote access enabled via WakeupCall.
Communication mode is enabled and remote access is allowed. You can find a list of possible
"Trigger conditions" in the section Tags in Syslog Messages (Page 378).
Info
local0
IEC 62443-3-3 Reference: SR 1.13
{Protocol}: User {User name} logged in to {FQHN}.
WBM: User admin logged in to 192.168.1.105.
The user has successfully logged in to the remote device.
Info
local0
IEC 62443-3-3 Reference: SR 1.13
{Protocol}: User {User name} failed to login to {FQHN}.
WBM: User admin failed to login to 192.168.1.105.
The user cannot log in to the remote device.
Error
local0
IEC 62443-3-3 Reference: SR 1.13
{Protocol}: User {User name} has logged out from {FQHN} .
WBM: User admin has logged out.
The user has logged out of the remote device.
Syslog Messages
D.3 Explanation of the messages
383