Siemens Simatic RTU303xC Series Operating Instructions Manual page 125

Status
The following information is shown:
● Station name
Station name that you assigned on the "System" Web page.
● Activated firmware version
● Activated on
The activation date of the firmware
● Bootstrap version
The bootstrap version of the firmware
● IfMobile wireless module version
The version of the mobile wireless module of the RTU
Firmware update
If a new firmware version is available for the RTU, you will find this on the Internet pages of
Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15920)
Firmware files have the file format *.sfw
Download the firmware file to the file system of your configuration PC.
● File
After selecting a firmware file stored on the configuration PC using the "Search" button,
the file name is displayed here.
● Search
Searches the file system of the configuration PC for a firmware file saved there that is
intended to be loaded on the RTU.
● Load on device
By clicking the button, download the selected firmware file to the RTU.
Following the download the firmware is not yet used. The following properties of the new
firmware file are displayed:
● Firmware status
Shows whether the firmware file was downloaded free of errors or with errors.
● Signature status
Shows the result of the signature check.
● Description
Shows a brief description of the firmware file.
● Version
Version of the loaded firmware file
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
Configuration (WBM)
4.12 Maintenance
125