Recipient Groups - Siemens Simatic RTU303xC Series Operating Instructions Manual

Configuration (WBM)
4.17 Users / groups
To change the access data (user name, password), you need to select the "Change login
data" check box. The input boxes can then be edited.
● Change login data
When this option is enabled, you can change user data.
● User name
Enter the new user name.
● Password
Enter the new password.
● Repeat password
Repeat the new password.
By clicking "Apply" the changed data is saved and needs to be entered at the next login.
4.17.2

Recipient groups

Recipient groups
Here you specify the recipient groups for messages (SMS messages / e-mails) of the RTU.
When configuring the individual message types, you always specify a recipient group in the
WBM as the recipient of the messages.
With the recipient groups you specify which message types are received by which groups of
users. For example with a group concept. You can specify that certain messages are
received by employees active in operation and other message types by service employees.
Every user can be assigned to any number of the maximum 10 groups.
164
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC