Online Support - Siemens Simatic RTU303xC Series Operating Instructions Manual

4.12.4

Online support

Here you can call up the Internet pages of Siemens Industry Online Support.
Online support
Link to the Internet portal of Siemens Industry Online Support
Click on "Siemens Industry Online Support" to connect to the Internet pages of Siemens
Online Support.
There, you can search for information on the product or send a query to product support.
Configuration of the logging
In some cases, product support can send you a logging file of the type *.sup to log events.
You save this logging file in the file system of the configuration PC. On this WBM page you
download the file to the RTU.
For logging you require an SD card with at least 8 MB free space.
● File
After selecting a logging file stored on the configuration PC with the "Search" button, the
file name is displayed here.
● Search
Searches the file system of the configuration PC for a logging file saved there that is
intended to be loaded on the RTU.
● Load on device
By clicking the button, download the selected logging file to the RTU.
● Standard settings
Loads the default logging file preset in the factory instead of a file for logging made
available by Product Support.
● Delete
Deletes a no longer required logging file from the RTU.
After deleting the logging file, logging is disabled again.
Enable logging
After loading the logging file, logging must be actively enabled.
● Enable logging and save the file on the SD card
By enabling the option logging is started as soon as you click the "Apply" button.
The log file is saved on the SD card and updated during operation if relevant events
occur.
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
Configuration (WBM)
4.12 Maintenance
129