Buttons on the PMI....................8 Display........................9 Key switch ......................9 Operation ......................10 ALARM Procedure .....................10 Reset an alarm ....................11 Procedure in case of trouble ................11 Display and scroll through lists................12 4.4.1 Show ALARM list ................12 Maintenance......................13 Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
1 About this document Goal and purpose This document describes the operation of the remote terminal FT2015 in a fire detection system. The reader shall become familiar with the possible indications and operating functions on the terminal, as well as with the functionality of the terminal in the overall system.
You will find technical terms and explanations for them in document A6V10333401, in the 'Glossary' chapter. See chapter 'Applicable documents'. History of changes The table below shows this document's history of changes: Modification index Edition date Brief description 01.2012 First edition MP-UL 1.0 Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
ABCDE CCC ––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––– Display figure in tables The table representation has the following key deviations from the original: Font and representation (proportional font, not inverted) No frame around selection Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
Events which are no longer displayed due to this limit can be listed in full on the control panel. See also Display and scroll through lists [➙ 12] Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
The navigation buttons work in the same way as the arrow keys on a PC keyboard. With the <▲> and <▼> buttons, the next entry in a list can be scrolled to. <Audibles ON/Silenced> Deactivates the buzzer. Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
Display depiction with two messages displayed Header Depiction area Key switch You can use the key switch to release operation. The key switch has two positions: ON (horizontal position) OFF (vertical position) Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
To reset, the key switch must be activated. The room may have to be vented before a reset is possible. Elements which cannot be reset can be temporarily bypassed on the control panel. Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division...
'Unoccupied operation' operation mode – Remote transmission for 'Troubles' is activated. 'Occupied operation' operation mode – The remote transmission for 'Trouble' is activated unless '' is acknowledged within the delay t1. Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
The figure below shows a sample alarm event': Fire Department requested 001 ALARM Man. FIRE ALARM Zone Zone 1 –––––– ––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––– –––– Alarm event Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...
Please adhere to the local provisions. No maintenance work is required. Cleaning the Person Machine Interface To clean the Person Machine Interface, use a damp cloth. Do not use cleaning or abrasive agents or solvents. Siemens Industry, Inc. A6V10333444_a_en_US Building Technologies Division 01/18/2012...