Texts - Siemens Simatic RTU303xC Series Operating Instructions Manual

Configuration (WBM)
4.19 Tags
Battery
Parameters
● Active
● Name
● Current value
Display of the value of the tag
● Read
Click on the button to display the current value of the tag.
Update cycle
● Reduction factor for basic cycle
The reduction factor lowers the frequency of the update cycle for this input, the intervals
between update cycles increase.
You configure the basic cycle in "Operating mode.
● Logging
See section Configuration of the tags , general parameters (Page 179).
4.19.10

Texts

Note the characters permitted for the input boxes and the syntax of the placeholders, see
section Permitted characters and parameter lengths (Page 95).
Texts
Up to 20 texts can be configured.
● Add
Click the button to create a new text tag.
● Delete
First select a text in the table and then click "Delete" to delete this text tag.
A prompt for confirmation appears.
– Delete
– Cancel
196
Click "Delete" to delete the tag irrevocably.
Click "Cancel" if you do not want to delete the tag. The normal view of the WBM page
appears again.
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC