Siemens Simatic RTU303xC Series Operating Instructions Manual page 170

Configuration (WBM)
4.18 Operating mode
● Send last log file by e-mail when a new one is created.
If the option is enabled, the last log file is sent as an attachment of an e-mail as soon as a
new log file is created.
– Recipient group
– Subject
– Text
– Attachment zipped
– Change immediately to communication mode
● Transfer last log file using FTP when a new one is created.
If the option is enabled, the last log file is sent to the FTP server as soon as a new log file
is created.
– Server path
– Append
– Transfer file as ZIP archive
– Change immediately to communication mode
170
Here you select the recipient group for the e-mails with the log files.
Configuration of the recipient groups in "Users / groups"
Here, select the subject of this e-mail.
Configure the subject in "Tags" > "Texts"
Here, select the text for this e-mail.
Configure the text in "Tags" > "Texts"
If you enable the option, the attachment is sent as a compressed ZIP archive.
If you select the option, the RTU changes immediately to communication mode as
soon as a new log file is ready for sending.
Here you have the option of selecting a path that you configured in "Services > FTP".
If the option is enabled, the transferred file will be appended to the FTP server. On the
server no file of the same name will be overwritten.
If you enable the option, the file is transferred as a compressed ZIP archive.
If you select the option, the RTU changes immediately to communication mode as
soon as a new log file is ready for sending.
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC