Analog Memory Bits - Siemens Simatic RTU303xC Series Operating Instructions Manual

4.19.6

Analog memory bits

Note the characters permitted for the input boxes, see section Permitted characters and
parameter lengths (Page 95).
Analog memory bits
Parameters
● Active
● Name
● Type
Assign the tags to one of the following types:
– Analog value
– Counter
● Initial value
Optional: Enter an initial value that the tag uses as a basic value.
● Current value
Display of the current value of the tag
● Read
Click on the button to display the current value of the tag.
● Preset value
Optional: You can write the the value entered here to the tag.
● Write
Click the button to write current preset value to the tag.
Format
● Unit
● Format
Logging
See section Configuration of the tags , general parameters (Page 179).
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
The tag type is intended for analog signals.
Formats of the tags: Floating-point number with sign (32 bits)
The tag type is intended for counter inputs.
Formats of the tags: Integer without sign (32 bits)
Configuration (WBM)
4.19 Tags
193