Division - Siemens Simatic RTU303xC Series Operating Instructions Manual

Parameters
Parameters
Input parameters
En
Input 1 .. Input 4
Output parameters
Product
Error
5.5.4

Division

Function
The block divides the value of the input "Dividend" by the value of the input "Divisor". The
quotient is written to the output.
Parameters
Parameters
Input parameters
En
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
Tag type / range of Description
values
Enable parameter, see section Often used parameters
(Page 252).
Analog input / bit The values of the activated inputs are used for the multi-
memory plication.
Event counter / usage Inputs with the setting "Unused" are not evaluated.
meter
Analog memory bit Tag in which the calculated product is output.
Configured as a
•
floating-point
number:
±3.402823 e-38 ..
±3.402823 e+38
Configured as a
•
counter:
0 .. 4294967295
Digital output / bit Error display:
memory
•
•
Tag type / range of Description
values
Enable parameter, see section Often used parameters
(Page 252).
5.5 Blocks for basic types of calculation
0: Block processing completed without errors
1: Block processing aborted with an error
For the meaning, see Often used parameters
(Page 252).
Program blocks
261