Logging In - Siemens Simatic RTU303xC Series Operating Instructions Manual

4.8

Logging in

Logging in
After establishing a connection between the configuration PC and the RTU, the WBM opens
with the page for the user to log in.
Enter the user name and the password.
Note
User data
When you log in the first time note to the information in the section User data for the first
login to the WBM (Page 106).
You will find instructions on changing user data and on the loss of access data (user name,
password) in section User (Page 161).
After clicking the "Log in " button the start page of the WBM is opened..
Note
Max. 2 connections to the WBM
If two connections are established to the WBM, note that changes cannot be made at the
same time on both connections.
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
Configuration (WBM)
4.8 Logging in
107