Security; Overview - Siemens Simatic RTU303xC Series Operating Instructions Manual

Configuration (WBM)

4.16 Security

Paths of the FTP server
If you do not want to save the files in the standard directory of the server, you can specify
optional paths here.
The configured paths must correspond to the path names on the server. If the paths do not
exist, they are created by most servers when the first transfer is made.
4.16 Security
4.16.1

Overview

OpenVPN connection
● Connection exists to the OpenVPN server
Connection status to the OpenVPN server
● IP address
Shows the last IP address assigned by the OpenVPN server.
● Subnet mask
Shows the last subnet mask assigned by the OpenVPN server.
Note
Network settings when using OpenVPN
If you use OpenVPN, make sure that the LAN subnet of the RTU and the OpenVPN
subnet do not overlap otherwise no connection can be established to the RTU via
OpenVPN.
For information on the LAN settings, refer to the section LAN (Page 130).
● Active OpenVPN server
Name or IP address of the OpenVPN server
● Connected since (dd:hh:mm:ss)
Duration of the existing connection to the OpenVPN server
Statistics of the current connection
The numbers apply to the currently established connection.
For the meaning of the parameters, see below.
150
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC