Siemens Simatic RTU303xC Series Operating Instructions Manual page 385

Nonrepudiation
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
Severity
Facility
Standard
Communication integrity
Message text
Example
Explanation
Severity
Facility
Standard
Session integrity
Message text
Example
Explanation
Severity
Facility
Standard
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
{Protocol}: User {User name} has changed configuration.
WBM: User admin has changed configuration.
The user has changed all the configuration data by loading a new *.cfg file.
Info
local0
IEC 62443-3-3 Reference: SR 2.12
{Protocol}: User {User name} has changed {Config detail} configuration.
WBM: User admin has changed OpenVPN configuration.
User has changed certain configuration data. You can find a list of the possible "Config details" in
the section Tags in Syslog Messages (Page 378).
Info
local0
IEC 62443-3-3 Reference: SR 2.12
{Protocol}: User {User name} has initiated a reset to factory defaults.
WBM: User admin has initiated a reset to factory defaults.
User has initiated a reset to factory settings.
Info
local0
IEC 62443-3-3 Reference: SR 2.12
{Protocol}: Integrity verification failed.
VPN: Integrity verification failed.
Proof of integrity failed.
Error
local0
IEC 62443-3-3 Reference: SR 3.1
{Protocol}: Session ID from {IP adress} verification failed.
WBM: Session ID verification failed.
Session ID is invalid.
Error
local0
IEC 62443-3-3 Reference: SR 3.8
Syslog Messages
D.3 Explanation of the messages
385