Siemens Simatic RTU303xC Series Operating Instructions Manual page 246

Configuration (WBM)
4.24 Tag tables
Table 4- 11 Line types and selectable parameters
Number Line type
in the
example
③
Header
Text
Difference: A heading is dis-
played in "bold" and body text
in "normal".
④ Empty line
⑤ Text with color status
⑥
Text with value display
⑦
Text with switch
246
Parameter
Text alignment
•
Text
•
No further configuration options are displayed.
Text alignment
•
Text
•
Tag
•
Possible selections: Created digital tags
Color ON/OFF
•
Select the color for the status ON (left selection) or for the status OFF
(right selection) from the two lists.
Tag alignment
•
Select the alignment for the color status field.
Text alignment
•
Text
•
Tag
•
Possible selections: Created digital tags or analog and counter tags. For-
mat and unit, if applicable, are taken from the tag configuration.
The "Text for ON/OFF" is used for digital tags.
The format and unit configured there is used for analog and counter tags.
Tags without formatting configuration (e.g. Battery voltage, Temperature
(internal) etc.) use the pre-defined formatting for logging.
Tag alignment
•
Alignment of the value and its unit.
Text alignment
•
Text
•
Tag
•
Possible selections: Created tags of the Digital output / bit memory type
Alignment of the input box: Centered
The button displays the status of the assigned tag via the configured col-
ors. Clicking the button inverts the value of the tag (ON => OFF, OFF =>
ON). The state is not read again before the new value is written, i.e. the
state is changed based on the last reading (update of the page) and thus
the last displayed state.
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC