Siemens Simatic RTU303xC Series Operating Instructions Manual page 162

Configuration (WBM)
4.17 Users / groups
Table
The table shows all users and their configured data.
● Add
Creates a new user.
When you create a new user, you need to assign the name, the user name and the
password. . You can leave the other data boxes empty and complete them later.
● Delete
Deletes the user selected in the table above.
When you click the "Delete" button, two buttons are displayed as a prompt for
confirmation:
– Delete
– Cancel
All users except at least one can be deleted.
You configure the individual users below the table.
Change user
The following data can be configured optionally. Some data is necessary for the
communication functions of the RTU.
Select a user in the table with the mouse.
● Name
Name of the user (not the user name)
● Companydepartment/positiion
Here, you can configure organizational characteristics of the user.
162
Deletes the selected user once and for all.
Cancels the deletion and the normal picture of the WBM page is shown again.
Operating Instructions, 06/2019, C79000-G8976-C382-06
RTU303xC