Siemens Simatic RTU303xC Series Operating Instructions Manual page 345

Only for RTU3031C:
● EN 61000-6-2+AC
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments
● ETSI EN 303 413 V1.1.1
● Satellite earth stations and systems (SES) - Global Navigation Satellite System - Radios
for operation in the frequency bands from 1164 MHz to 1300 MHz and from 1559 MHz to
1610 MHz
Art. 3 (2) Measures for efficient use of the frequency spectrum
Harmonized standards:
● ETSI EN 301 511 V9.0.2
Global system for mobile communication (GSM). Harmonized standard for mobile phones
in the GSM 900 and GSM 1800 bands covering essential requirements of article 3.2 of
the R&TTE directive.
● ETSI EN 301 908-1 V6.2.1
IMT cellular networks - Harmonized standard covering the essential requirements of
article 3.2 of the R&TTE directive. Part 1: Introduction and common requirements
● ETSI EN 301 908-2 V6.2.1
IMT cellular networks. Harmonized standard covering the essential requirements of article
3.2 of the R&TTE directive. Part 2: CDMA Direct Spread (UTRA FDD) User Equipment
(UE)
The current versions of the standards can be seen in the EC Declaration of Conformity, see
above.
Maximum antenna gain
Users and installers must be provided with antenna installation instructions and transmitter
operating conditions that must be followed to avoid exceeding the permitted RF exposure.
In this respect, note the technical specifications of the antenna, see appendix Antennas and
accessories (Page 363).
RoHS
The RTU meets the requirements of the EC directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581:2012
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
Approvals
345