Siemens Simatic RTU303xC Series Operating Instructions Manual page 99

Parameter
Messages
Message texts including up
to 6 placeholders for process
values with formatting in-
structions.
The placeholders in the
message are replaced by the
current value.
OpenVPN
User name
Password
RTU303xC
Operating Instructions, 06/2019, C79000-G8976-C382-06
String length Permitted characters / format
Min. Max.
0 160
0x30 .. 0x39
•
0x41 .. 0x5A
•
0x61 .. 0x7A
•
0x21 .. 0x2F
•
0x3A .. 0x40
•
Umlauts (ä, ü etc) and ß: 0xC4, 0xE4, 0xD6, 0xF6, 0xDC, 0xFC, 0xDF
•
Square brackets (0x5B, 0x5D) are reserved for placeholders.
The following formats are permitted for placeholders:
[V]
•
Decimal value of a tag. V is the placeholder for the tag name.
Signal names must not contain square brackets (0x5b, 0x5D).
[DATE]
•
Current date. Format: yyyy-mm-dd
[TIME]
•
Current time. Format: hh:mm:ss
[V.T] or [V.T2]
•
Placeholder for a counted value that is output as a period of time.
[DEVNAME]
•
Placeholder for own station name
[MOB_SIG_QUAL]*
•
Signal quality of the mobile network as signal strength CSQ (outside
communication mode = 0)
[MOB_CELL_ID]*
•
Cell identification (CI) of the mobile wireless interface (outside com-
munication mode = 0)
[MOB_TX_KB]*
•
Sent data at the mobile wireless interface in KB
[MOB_RX_KB]*
•
Received data at the mobile wireless interface in KB
[BAT_RES_CHARGE]**
•
Available remaining capacity of all connected batteries in mA
* only with RTU303xC
** only with HW2
0 127 No restrictions
0 31
4.4 Permitted characters and parameter lengths
Configuration (WBM)
99