Mitsubishi Electric Q Series Programming Manual page 187

7 TRANSMISSION MODULE
< Example 2 > Same synchronous encoder is connected to auxiliary
Synchronous encoder No.1
< Example 3 > Same synchronous encoder is connected to a drive
Synchronous encoder No.1
Set all to external input mode.
input axis
Set all the clutches connected to the same synchronous
encoder set to the external input mode. (Also set clutch
ON/OFF devices to the same setting.)
Set both to external
input mode. (Also set
clutch ON/OFF device
to the same setting.)
axis and auxiliary input axis
Set all the connected clutches to the external input mode.
(Refer to examples 1 and 2)
Synchronous encoder No.1
7 - 24
Synchronous encoder No.1