System Functions
Adjusting Display Brightness
The system screens have two levels of brightness. Touch the brightness icon on
the right side of the right touchscreen to adjust the display brightness.
The high and low brightness settings can be changed in Brightness Calibration as
explained on page 6-7.
Activation Log
The Activation Log allows the user to view the last 1000 activations and REM alerts.
1.
Touch the wrench icon on the right side of the right touchscreen. The Main menu
display appears in the left touchscreen.
2.
Touch Activation Log on the Main menu. The activation log appears on the center
touchscreen.
3.
Touch the single up or down arrow to the right of the activation log to scroll through
the log one line at a time.
4.
Touch the green arrow button on the bottom-right corner of the Main menu to return
to the previous setup configuration. The previous settings are displayed.
Service Display
Refer to Chapter 9, Maintenance and Repair for complete service instructions.
Restore
Select the Restore button on the Main menu to restore the system to the previous setup
configuration. The touchscreens display the last settings entered prior to shutting down
the system.
ForceTriad Energy Platform Service Manual
System Functions
5-3